But many folks make the mistake of putting the chair rail at the wrong height — a
mistake that can make a room feel lopsided and out of proportion. “Moldings are
If chair heights don't matter, simply divide the height of your ceiling by three, then
install the rail at the top of the lower third. In a room with standard 8-foot-high ...
To determine the height of the chair rail, measure the height of the ceiling and ...
tape measure and level to make a level line along the whole length of the room.
Installing a chair rail in a bedroom may be a design dilemma for the aspiring ... A
standard wall height is approximately 8 feet from floor to ceiling, or 96 inches.
In the days when chair rail
was actually used as a bumper for chair
backs, the answer would have been "as high as the chairs
But chair rail
now is used as more of a design element, than a practical device for protecting walls. You can look at chair rail height
from... More »
Dec 3, 2010 ... There are some 18th-century pattern books that show the chair rail at 24 in. off
the floor. In fact, in rooms with 9-ft. to 10-ft. ceilings, this height is ...
Jan 22, 2015 ... And so it is with the chair rail. Now I know that the chair rail in my old house was
at a height that made the room look oddly skewed, and that led ...
Jul 16, 2011 ... This couldn't be more wrong. The chair rail is not the waist of the room. It is not a
belt whose placement changes with the height of the person ...
Typically you want your chair rail molding to be 1/3 of the height of the wall, from
... You can get your level line around the room to locate the chair rail molding ...
Then, use a level and measuring tape to draw a guideline around the room at the
height where you want the chair rail to sit. If your floor is not level (a common ...