Web Results
Feb 11, 2014 ... Linxus Communications, LLC shows you how to correctly solder a stereo 3.5mm, ⅛", mini plug, or headphone connector. Host: Jesse Benson ...


Along with the fairly standard soldering iron, a new jack, and such, there's a few other things you'll need. You'll need a box cutter or X-Acto knife to score the ...


Apr 12, 2017 ... (If you don't know how to solder, you can learn the basics from the short video ... 3.5mm headphone jack plug showing the three connections.


Dec 18, 2014 ... Once you have the new connector jack to fix your headphones, make sure you use the alligator clips for a test to be sure you solder the correct ...


Apr 20, 2011 ... First, plug the headphones into an audio source and put on some music. ... Solder the white wire to the tip probe on the replacement jack.


Headphone Plug Replacement: This guide demonstrates the replacement process for ... Wrap the wire around the terminal a few times, then solder it in place.


4-Pole Headphone Jack Replacement: Replace a damaged 4-Pole headphone ... with an in-line microphone) by removing it and soldering on a new connector.


Aug 13, 2013 ... If you have the right tools (which include a soldering iron), you can strip the cord of a headphone cable off and add a new plug to the end.


Jan 26, 2016 ... So the first step is determining if your headphone plug is the problem. ... Note: Solder is applied to the ends of the wires whether they are ...


Slightly scratch the connectors on the back of the plug so that the solder will go on ... I have a guitar amp without a headphone output, but want to install one ...