If the bondo has cured for more than 24 hours polyester resin will not chemically
bond to it. However, if as has been said, you rough up the ...
Aug 12, 2015 ... Is it possible to use epoxy resin fiberglass over Bondo? I'm guessing not, in which
case, is there anything I can apply over the filler that would allow ... Epoxy will
bond to quite a number of surfaces "including" polyester resins.
Epoxy do not bond well to polyester (plastic). ... One thing I do not like about
Bondo, it'll flake off or peel away in time. ... a different polyester putty compound
made particularly for use on fiberglass boats called "Hull and Deck.
Sep 4, 2007 ... can I use polyester filler to fair between coats of west epoxy? ... This blush if not
removed will also give you bonding problems. ..... Epoxy over Polyester, Blue
Heron, Fiberglass and Composite Boat Building, 6, 12-09-2005
Fear not, composite parts are often easier to repair than parts made from
traditional materials. ... This is because the techniques described will work for any
fiberglass ... This means all repairs are dependent upon physical bonding to the
surface ... Polyester resin in the repair patch and in standard body filler often
It's not very strong structurally and tends not to stick to really slick surfaces. ... You
can brew up your own by chopping up some glass woven roving and adding ...
Fiberglass is a trademarked brand name, like Bondo. ... resin for laminating
because the layer to layer bond is weaker than with laminating resin.
Sep 1, 2009 ... Anyone know what the stuff DOES NOT stick to. And perhaps and ideas ... does
candlewax work. will bondo stick to coroplast? Stew2 ANDY!7 ...
Buy Bondo Fiberglass Resin, 1 Gallon at Walmart.com. ... Pickup not available ....
Creates a strong and long-lasting bond; Can be sanded in less than 2 hours ...
May 1, 2016 ... Fiber bonded with plastic resin has a long long history. As with .... The fiber in
FRP does not need to be glass fiber either; it can be cotton, linen, ...
This product can be used with Bondo Fiberglass Cloth or Mat to create a stronger
.... I bought a quart of this and the resin was not clear but a smoky used oil color.
..... Feels very strong and seems to have bonded to the plastic bumper just fine.