Web Results

en.wikipedia.org/wiki/Static_routing

Static routing is a form of routing that occurs when a router uses a manually- configured routing entry, rather than information from a dynamic routing traffic. In many cases, static routes are manually configured by a network administrator by adding in ... Enterprise-level Cisco routers are configurable using the Cisco IOS ...

www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_route.html

Jun 14, 2017 ... This chapter describes how to configure static routes on the Cisco Nexus 7000 series switches running Cisco NX-OS release 5.0(2) and later ...

www.cisco.com/c/en/us/support/docs/dial-access/floating-static-route/118263-technote-nexthop-00.html

Sep 2, 2014 ... In order to configure a static route that is overridden by an EIGRP route, specify an administrative distance that is greater than 170 for the static ...

www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/unicast/configuration/guide/l3_cli_nxos/l3_route.pdf

This chapter describes how to configure static routing on the Cisco NX-OS device .

supportforums.cisco.com/t5/network-infrastructure-documents/static-routes-with-next-hop-as-an-exit-interface-or-an-ip/ta-p/3146984

Aug 26, 2017 ... In point to point interface, by definition two devices are directly connected, so in case if you configure static route pointing to outgoing interface or next hop IP ...

www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/unicast/503_u1_2/nexus3000_unicast_config_gd_503_u1_2/l3_route.html

This chapter describes how to configure static routing on the switch. This chapter includes the following sections: • Information About Static Routing. • Licensing ...

www.ask.com/youtube?q=Cisco+Add+Static+Route&v=65wWu47_5NY
Oct 13, 2012 ... http://networkingexamacademy.com - In that video we will learn about how to configure static routes on a Cisco Router. This video is part of ...

www.ciscopress.com/articles/article.asp?p=391648&seqNum=4

Jun 3, 2005 ... Figure 6-1 shows the network topology for the configuration that follows, which shows how to configure static routes using the commands ...

www.networkworld.com/article/2345135/cisco-subnet/how-to-configure-static-routes.html

Jul 14, 2008 ... To configure a static route, issue the ip route prefix mask {ip-address ... Cisco consummates agreement with legendary reseller CXtec · # 3.