This can be verified by issuing the show ip route command in privileged exec
mode on the console of the Cisco router. For example, the following commands ...
IP Routing Protocol-Independent Commands. accept-lifetime. distance (IP).
distribute-list in (IP). distribute-list out (IP). ip default-network. ip local policy route-
Sep 2, 2014 ... For example, ip route 172.31.10.0 255.255.255.0 10.10.10.2 101. .... in seconds [
2]: Extended commands [n]: y Source address or interface: ...
This command is supported in the Cisco IOS Release 12.2SX train. .... Note If the
no ip route-cache same-interface command is configured, the bfd echo accept ...
Aug 17, 2010 ... Where would I set up ip route and to what address. I feel like I'm just guessing
and don't really understand the concept. Picture is from Cisco ...
Jun 3, 2005 ... CCNA Command Quick Reference (Cisco Networking Academy Program) ...
Boston(config)#ip route 172.16.30.0 255.255.255.0 172.16.20.2.
Jun 3, 2005 ... This chapter condenses the CCNA Routing commands into an ... When using the
ip route command, you can identify where packets should be ...
Free Online Cisco CCNA Networking Tutorials...Static routing and ... ip route: this
command creates the static route and tells the router that this is a static route.
You are here: Home // Cisco // CCNA Study Guide 640 - 802 // Routing Static
Dynamics ... To configure and enable static routing on R1 follow these
commands exactly. ... Interface Serial0/0/0, changed state to up R1(config)#ip
route 126.96.36.199 ...
This article explains static route command of cisco router. IP route command is
used to configure static route in network.