Configuring wireless networking on the TS3722 inkjet printer means connecting the device to a local Wi‑Fi network so phones, tablets, and computers can send print jobs without cables. This overview covers what to prepare before setup, how the model typically interacts with home routers, network and credential requirements, multiple setup methods (app, WPS, and computer-assisted), common connection failures and fixes, security and firmware considerations, and how to verify a successful install.
What to prepare before starting a wireless setup
Gather the physical items and network details first. Keep the printer power cable and a nearby USB cable available in case a wired setup or temporary connection is needed. Note the exact Wi‑Fi network name (SSID) and password; copy them rather than guessing. Have the router model and admin access information on hand if router settings will need adjustment. If you plan to use a smartphone app, install the Canon PRINT Inkjet/SELPHY app on the device you intend to print from.
Model overview and compatibility
The TS3722 is an entry-level inkjet designed for home and small-office printing. It supports standard Wi‑Fi networking methods common to consumer printers and communicates over typical home router configurations. Many Canon home printers support only 2.4 GHz Wi‑Fi bands; confirm whether the TS3722 requires 2.4 GHz rather than 5 GHz. Consult the official Canon documentation for exact wireless capabilities and any model‑specific button sequences or LEDs used during setup.
Network requirements and credentials
Successful wireless setup depends on a few router-side settings. The network should broadcast an SSID that is discoverable; hidden networks require manual SSID entry during configuration. Use WPA2 or WPA3 security where available, with a passphrase you can enter accurately. Ensure DHCP is enabled on the router so the printer can obtain an IP address automatically. If your router segregates guest networks or isolates wireless clients (AP/isolation), the printer may be unable to see devices on the main network; move the printer and device to the same network segment during setup.
Step-by-step wireless setup methods
There are three common approaches observed in home environments: app-based setup, WPS pairing, and computer-assisted setup. Each has trade-offs between convenience and control.
App-based setup (recommended for mobile-first users): Open the Canon PRINT Inkjet/SELPHY app on your phone or tablet. Follow the app prompts to detect printers on the local network or to start an on‑printer configuration mode. The app will guide you through selecting the SSID and entering the Wi‑Fi password. This method often provides clearer feedback on success and integrates easily with mobile printing features.
WPS pairing (router-supported quick connect): If the router supports Wi‑Fi Protected Setup (WPS), use the router’s WPS push button, then initiate the WPS mode on the printer per Canon’s documented steps. WPS pairs devices without typing long passwords, but not all routers enable WPS by default and some users disable it for security reasons. Check the router admin interface and the printer manual for precise timing and indicator behavior.
Computer-assisted or USB‑temporary setup: Install Canon’s setup software on a Windows or macOS computer and connect the printer temporarily via USB if the wireless-only path fails. The setup utility can transfer network credentials to the printer. This method gives granular control and can be helpful if the printer cannot directly detect the network due to band or security settings.
Troubleshooting common connection issues
If the printer cannot join the network, start with simple, observable checks. Confirm the SSID and passphrase were entered exactly, including capitalization and special characters. If the router broadcasts both 2.4 GHz and 5 GHz bands under similar names, move the printer to the 2.4 GHz SSID if required. Restart the printer, router, and the device used for setup—power cycling clears temporary conflicts.
Check router features that commonly block devices: AP/client isolation, MAC address filtering, or VLANs that separate wireless clients. Temporarily disable those features or add the printer’s MAC address to an allowed list. If DHCP is off, assign a compatible static IP within the router’s subnet. Observe the printer’s network status reports or LEDs; they often indicate whether the device received an IP address.
When connection attempts repeatedly fail, update both router firmware (if available) and printer firmware according to manufacturer instructions. If the router is new or uses WPA3-only networks, try enabling WPA2/AES for backward compatibility. For persistent problems, consult Canon’s support resources for model-specific diagnostics and known issues.
Security and firmware considerations
Security choices affect both connectivity and safety. Use strong WPA2 (or WPA3 where supported) encryption and avoid open networks. While WPS is convenient, it has known vulnerabilities; weigh convenience against security needs and consider disabling WPS after initial setup. Keep printer firmware current by checking Canon’s official downloads; firmware updates can fix connectivity bugs and improve protocol compatibility. Avoid sharing administrative router credentials broadly, and place the printer on the primary network rather than isolated guest networks when regular printing from multiple devices is required.
Verification and printing test
After the network join completes, verify the printer’s status. Print a network configuration or status page from the printer’s control panel to confirm the assigned IP address and SSID. From a computer or phone on the same network, add the printer using the detected network printer option or the Canon app, then send a small test page (text and an image) to validate both connectivity and correct driver selection. If the test print succeeds, check scanning or other network services if applicable.
Trade-offs and accessibility considerations
Choosing a setup method involves trade-offs between simplicity and long‑term control. App-based and WPS methods are quick but can obscure advanced settings; computer-assisted setups give more control but require a compatible OS and sometimes a temporary cable. Accessibility matters: users who rely on screen readers or alternative input devices might prefer computer setup software that supports those tools, while tactile controls on the printer may be challenging for some users. Router compatibility limits—such as support for only certain Wi‑Fi bands or enterprise authentication—can require hardware changes or assistance from network administrators.
How to test Canon TS3722 connection
Wireless printer setup with home routers
When to seek professional printer support
Key takeaways and concise next steps
- Checklist before starting: power, SSID, password, Canon PRINT app, router admin access.
- Try app-based setup first; use WPS if router supports it and manual entry fails.
- If problems persist: restart devices, confirm 2.4 GHz band, check DHCP and AP isolation, update firmware.
- For unresolved issues: consult Canon’s official documentation, router vendor support, or IT personnel for network‑level restrictions.
Completing these steps will clarify where a connection failure originates—local credentials, router policy, or printer settings—and guide whether a simple retry, firmware update, or professional network assistance is the most efficient next move.
This text was generated using a large language model, and select text has been reviewed and moderated for purposes such as readability.
