Web Results


A distributor is an enclosed rotating shaft used in spark-ignition internal combustion engines that have mechanically-timed ignition. The distributor's main function is to route secondary, or high voltage, current from the ignition coil to the spark plugs in the correct firing order, and ...


How to Put Spark Plug Wires in the Correct Firing Order ... Remove the distributor cap, crank the engine and make note of the distributor rotation direction.

Mar 22, 2016 ... How to wire up your HEI distributor for your small block Chevy.
Apr 2, 2012 ... Distributor cap alignment n spark plug wire order. poopypants03 ... What year model is yours or does it matter the firing order is the same.


In fact it is missing so bad it will barely run and you suspect the firing order is off. You are sure you moved the spark plug wires from the old distributor cap to the ...


Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the ...


The rotor is located under the distributor cap and turn clockwise or ... Compare the spark plug wires firing order the manual and make sure that each wire is ...


The firing order on a distributor cap is the order of the wires. The spark plugs are wired to the distributor cap. As the points connect for the wire ...


Trouble is, I didn't swap the cap wire-by-wire like I usually do because I figured I could just look up the firing order of a 350 sbc with the HEI.