Video Results from
Published in : 2017-05-17 | by HumbleMechanic
The turn signals in my 2005 VW Passat do not work. Today we are going to diagnose why the signals failed, including the hazard relay, checking fuses, and ...
Published in : 2016-07-31 | by Joey's Garage
Easy walk-through of diagnosing a turn-signal "flasher" problem. Merch: Donate: ...
Published in : 2017-09-20 | by lynzteee
affiliate link to the part: our van is a 1999 dodge ram 2500. recently, our van blinkers (and hazards) stopped working completely. we first ...
Published in : 2017-02-23 | by TightWadRepairs
Ever been driving and your blinkers stop working? The fix is very easy and CHEAP.
Published in : 2016-05-25 | by STEALTH
If your turn signal stops working, you may have a crack in the solder that makes the connection on your relay. This is the how to solution to fix that problem.
Published in : 2017-10-24 | by Motorman 0057
Test The Ground and Power Going To The Socket With A Test Light. This Turned Out To Be A corroded socket not grounding the bulb. $15.00 for the socket a my ...
Published in : 2009-12-11 | by Daniel Engling
This Video shows you how to get a worn down relay to start clicking again.
Published in : 2012-02-28 | by Nx2overide
something I found and though I would share.
Published in : 2011-05-18 | by MotoBoy
If anyone has the problem where there blinker clicks on at twice the speed it normally does then you have a common problem. Here's a couple of tips on how to ...
Published in : 2016-09-17 | by DC Crush
I check the fuse and also switched it but it still doesn't work. I had also put the key to the on position and still no turn signals. It worked with the old harness for the ...